Slide background
TX4 Digitaler Wägetransmitter
  • TX4 Digitaler Wägetransmitter
TX4 Digitaler Wägetransmitter
TX4 digital transmitter family is designed for static or dynamic weighing and force measurement processes to provide fast
and accurate digital data through RS 232C, RS-485, Ethernet TCP/IP and bus systems as Profibus, Modbus TCP,Modbus RTU, Profinet, CANopen. TX4 transmitters have a parallel port
including 1 x Output and 2 configurable as Inputs or Outputs which can be controlled directly by PLC.
TX4 transmitters are programmed and calibrated via PC by BAYKON xFace software. Weighing functions such as Zeroing, Taring, Power-On zero, net indication at power on, Motion detection, configurable vibration suppression digital filter and electronic calibration without test weights (eCal) are important features. DIN rail type enclosure provides easy montage in control panel.

Features
-Communication: RS-232C, RS-485, Ethernet TCP/IP, Profibus, Modbus RTU, Profinet, CANopen
-High speed: 800 conv./sec
-Anti-vibration filter: Adaptive antivibration active filter for fast and stable reading
-Weighing functions: Taring, AZT, zeroing, power on zero, net indication at power on, motion detection

-eCal: Electronic calibration without test weights
-Digital I/O: Parallel port with 1 x Output and 2 x configurable as Inputs or Outputs
-Software support: Windows based BAYKON xFACE software for calibration and setup via PC

TX4 series instruments TX4AD: RS-485
TX4EN: Modbus TCP/IP
TX4MB: Modbus RTU
TX4PB: Profibus DP
TX4PN: Profinet
TX4CO: CANopen
Type 24 bit Delta-Sigma ratiometric with integral analog and digital filters
Conversion rate Up to 800 measurements per second
Minimum input voltage < 1 mV
Minimum input sensitivity 0.1 μV per interval
Analogue input range 0 mV to 18 mV unipolar or -18 mV to 18 mV bipolar
Linearity Within 0.0015% FS, 2 ppm/°C
Resolution Internal up to 16 000 000; External up to 100 000 counts in weighing / Force modes,
1 000 000 counts for unipolar input and for selected range in count mode and
2 000 000 counts for bipolar input and for selected range in count mode
Calibration By etalon weights: via xFace software or fieldbus
eCal : Electronic calibration without etalon weights via xFace
Count mode: No calibration. All instruments are adjusted in production for high calibration accuracy
Digital filter 10 step adjustable digital adaptive filter
Weighing functions Tare, zeroing, auto zero tracking, motion detection, auto-zero at power-up, net indication at power on
Hardware 1 output (max.100 mA per output) and
2 configurable I/O (11 to 28 VDC input signal range, max. 100 mA per output)
Function Outputs are programmable for set points with/without threshold, tolerance band output or control output via PLC/PC. Inputs can be used for zeroing, taring or control input to PLC/PC.
Excitation 5 VDC, max. 100 mA
Number of load cells Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel
Connection 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection
Serial interface RS-232C 9600 baud, 8 None 1, xFace connection
Serial interface RS-485 (TX4-AD and TX4-MB) 1200 to 57600 baud, 7 even/odd, 8 None 1, continuous demand (BSI mode) or Modbus RTU
Modbus RTU interface (TX4-MB) Up to 31 units on the bus, Baudrate up to 57600
Modbus TCP and Ethernet TCP/IP (TX4-EN) 10Mbits (half dupplex), galvanically isolated
Profibus DP V1 interface (TX4-PB) 9,6 kbits/s to 12 Mbits/s automatic baudrate detection
Profinet interface (TX4-PN) 100Mbits (full dupplex), galvanically isolated
CANopen interface (TX4-CO) 10 kbits/s to 1 Mbits/s automatic baudrate detection
Power supply 11 to 28 VDC, max. 100 mA (TX4-AD and TX4-MB), max. 300 mA (others)
Enclosure Between -15 °C and +55 °C at 85% RH max, non-condensing
Operation conditions Polyamide, for DIN-rail mount, protection class IP20

Baykon_TX4_Digitaler_Wägetransmitter_Katalog
TX4_Technical_Manual
PLC Support Software Files(6,62 kb)
EthernetX File (4,83 mb)
GSD (Profibus)
GSDML (Profinet 1Port)
GSDML (Profinet 2Port)
EDS (CANopen)
EDS (EtherNet/IP)
ESI (EtherCAT)
XDD (Powerlink)
xFace PC Software
Bitte füllen Sie die Kontaktinformationen aus, damit wir uns schnell und effektiv bei Ihnen melden können.
Name *
Nachname *
Unternehmen *
Sektor *
Status *
E-Mail (Firmen) *
Telefon *
Land *
Stadt *
Anmerkungen *
Wenn Sie auf "einrechen" klicken, stimmen Sie der Firma Baykon zu, sich mit Ihnen in Verbindung zu setzen und Ihre Anfrage wird so schnell wie möglich beantwortet. Vielen Dank für Ihre Kontaktaufnahme mit uns.
ZERTIFIZIERUNG
© 2017 Copyright
BAYKON INC.
Alle Rechte vorbehalten
Üye Girişi / Login