BX1 Wägeindikatoren

Der BX1-Wägeindikator ist ein sehr genaues, vielseitiges Allzweckgerät, das in verschiedenen Gehäusen erhältlich ist und die industriellen Anforderungen für verschiedene Umgebungsbedingungen erfüllt.
Das Gerät ist von den Eichbehörden für den Einsatz in Anwendungen der Genauigkeitsklasse III mit 10000 und 2x6000 Intervallen gemäß OIML R76 zugelassen. Große 6-stellige LED-Gewichtsanzeige (rot 20 mm / Panel-Typ 14 mm) mit Wägestatusinformationen.
Mit einer Vielzahl von Schnittstellenoptionen, verschiedenen Kalibrierungsfunktionen einschließlich elektronischer Kalibrierung und einer Anzeigeauflösung von bis zu 60000d ist das BX1 ein perfektes Terminal für Wägeprozesssteuerungssysteme.

Features
-OIML10000e and 2 x 6000e approved
-20 mm LED display
-x10 key for high resolution
-1.000.000 keypad test
-Standard RS-232C port
-Battery option

2 type industrial boxes
-Desk and wall types;
-IP30, aluminum cast
-IP65, full stainless steel
Panel type;
-IP65 stainless steel front panel, aluminum body

External programming
-Easy programming and calibration via RS-232C port by BAYKON “INDFACE” software,
-Header and footer for label can be loaded from PC.

eCal - Electronic Calibration
Calibration without test weights
-Big advantage to calibrate a high capacity tank, silo or any weighing system calibrations.

System integration
-2. serial port RS-232C
-3. serial port RS-485, RS-232C or 20mA CL ASCII
-Ethernet TCP / IP
-Modbus RTU / TCP
-Profinet
-CANopen
-Profibus
-Opto-isolated parallel 3I / 3O
-Analogue output (0-10 V / 4-20 mA)
-Binary output

Accuracy class	III
EU type approval	10.000 intervals (single range) or 2 X 6000 intervals (multi range)
10.000 intervals (single range) or 2 X 6000 intervals (multi range)	% 0.0015 FS ; ≥ 2 ppm/°C
Display	6 digits, 7 segments, LED red, 20 mm high (Panel type 14 mm high)
Status annunciators	Gross, net, motion, centre of zero, weighing ranges, information, power, unit
Keyboard	8-key membrane, with tactile feedback
Key lock	Basic weighing related key can be locked against unauthorized access
Type	24 bit Delta-Sigma ratiometric ADC
Conversion rate	Maximum 100 measurements per second
Minimum input voltage	0.4 V per interval legal for trade; 0.1 V per interval non approved
Analogue input range	0 mV – 18 mV
Resolution	Internal up to 8.000.000; display up to 60.000 counts
Calibration	Standart: By etalon weights via keys or serial eCal: Electronic calibration without etalon weights
Digital filter	10 step adjustable digital adaptive filter
Weighing functions	Taring, zeroing, auto zero tracking, motion detection, auto-zero at power-up
Other functions	Label number, total, gross, tare indication
Set points	3 set points, programmable (needs I/O board is an option)
Tilting	Inhibits weighing when scale is tilted (needs I/O board option)
Serial interface	RS-232C, 1200...57600 baud, programmable
Alibi memory	Optionally available; 74880 records or 149760 records
Excitation	5 VDC, max. 100 mA
Number of load cells	Up to 6 load cells 350 or 18 load cells 1100 in parallel
Connection	4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection

Operation temperature	-10 °C to +40 °C legal for trade;
Humidity	85% RH max, non-condensing.

Enclosure	Aluminum cast desk type (IP30), panel type (front panel IP65) or stainless steel housing (IP65)
Power supply	230 VAC, 50/60 Hz or 24 VDC (max. 12 VA)

Brochure (189 kb)

Operation manuel (3,01 mb)

PLC support software files (6,54 kb)

Indface file (3,65 mb)

EthernetX file (4,83 mb)

EDS (CANopen) 0906

GSD (Profibus)

GSDML (Profinet 1Port)

GSDML (Profinet 2Port)