Product Brochure

Whether certified according to GMP or in conformity with EHEDG – the PUA579 drive-through scales meet the highest requirements.
The stainless steel scales are available in different standard- and free-size dimensions.
They are suitable for loads from 300 kg to 1500 kg, having a standard resolution of 1x3000e.
The low overall height of 35 mm respectively 45mm allows smooth driving via a ramp – a pit installation becomes redundant.
Thanks to new product options and a wide range of accessories, the PUA579 can be very well adapted to your demands.

• GMP
  The GMP approval allows use in chemical- and pharmaceutical branches where easy cleaning and hygiene are indispensable.

• EHEDG
  A drive-through scale and its accessories which meet the highest demands regarding hygiene in food industries.

• Strain gauge technology
  4 beam load cells guarantee precise weighing results.

• Plug n’weigh
  The metrological parameters are memorized directly in the weighing platform

• Dimension (Length x inner width)
  standard: 850x850mm; 1500x1250mm
  free-size: 750x400mm – 1500x1500mm

• Resolution ; Standard: 1x3000e single range
  optional: 2x3000e multi range, 3x3000e multi range, 2x3000e multi interval or 1x6000e single range.

• IP Protection
  The stainless steel weighing platform is protected according to IP68 and dedicated for use in wet areas.

• Overall height ;35mm up to 1500x1250mm,45mm up to 1500x1500mm

• Material
  standard: stainless steel 1.4301 / AISI304
  optional: stainless steel AISI 316..

• Accessories
  ramps, set of foot plates, lifting device, cable IDNet/analog in different lengths.

• Surface optional: ground material: surface roughness <1µm.

• Cleaning and service

• Use in hazardous areas PUA579: category 3G/D,PUA579x: category 2G/D

Product Brochure